User Manual
Table Of Contents
- IMPORTANT
- Legal Terms Governing This Document
- 1 OVERVIEW
- 2 PRE-INSTALLATION
- (Step 3) MOUNTING THE NODE B BRACKET
- 4 Site Preparation for Node B Installation
- 5 (Step 10) PHYSICAL INSTALLATION OF THE NODE B
- 5.1 Placing the Node B into the Rack
- 5.2 Service Area Interfaces
- 5.3 (Step 6) Grounding Installation and Inspection
- 5.4 Cable Clamp Seal
- 5.5 Connecting Power to the Node B
- Backhaul Connections to INC
- 5.7 Alarm Connections
- 5.8 Replacement of the Seal cable clamp
- 5.9 Conduit Pivot Bracket Securing
- 5.10 Closing the Door and securing the NodeB
- 5.11 GPS
- 6 (Step 11) Power up and Initial Setup of Node B
- 8
- 8 (Step 12) SOFTWARE INSTALLATION
- 9 (Step 13) On Air final check
- 10 Operation & Maintenance
Node B Installation Guide
DRAFT
17 July, 2001 IPWireless Proprietary
IT IS ILLEGAL TO MAKE COPIES OF THIS DOCUMENT WITHOUT EXPRESS PERMISSION BY IPWIRELESS
5
LIST OF ILLUSTRATIONS
CAUTION SIGNS.......................................................................................................................... 6
NODE B SPECIFICATIONS......................................................................................................... 8
NODE B FACE............................................................................................................................... 8
INSTALLATION CHECK CARD................................................................................................. 9
PARTS CHECK............................................................................................................................ 10
TOOLS REQUIRED PHYSICAL INSTALLATION.................................................................. 10
POLE MOUNT ASSEMBLY....................................................................................................... 13
RACK MOUNT ASSEMBLY ..................................................................................................... 14
NODE B PATCH PANEL............................................................................................................ 18
NODE B PATCH BOARD ENGINEER SPEC........................................................................... 35
INDICES
APPENDIX B – BACKHAUL SPECIFICATIONS.................................................................... 39
APPENDIX D – NODE B SPECIFICATIONS ........................................................................... 41
AIR INTERFACE......................................................................................................................... 41