Installation Guide

V5 Node B Installation Guide
Version 1.0.5 Page 8 of 44
FCC Regulatory Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
No changes shall be made to the equipment without the manufacturer’s permission as this
may void the user’s authority to operate the equipment.
To comply with FCC requirements, the V5 Node B has been approved for use with antennae
that have a maximum gain of 20dBi.
To comply with the FCC RF exposure rules, see the relevant section.
The 2.5GHz V5 Node B has been evaluated against the Maximum Permissible Exposure
(MPE) limits defined in Section 1.1310 of the FCC rules for the uncontrolled environment.
During normal operation, all persons should maintain a distance of at least 1.7m from the
antenna to ensure compliance with the MPE limits.
The 700MHz V5 Node B has been evaluated against the Maximum Permissible Exposure
(MPE) limits defined in Section 1.1310 of the FCC rules for the uncontrolled environment.
During normal operation, all persons should maintain a distance of at least 4.06m from the
antenna to ensure compliance with the MPE limits.