Install Instructions
Dehumidifier Settings & Controls
12
GENERAL FILTERS
INCORPORATED
4. You will need to select the initial system settings, to include:
• Desired Humidity Setpoint
• Units (Fahrenheit or Celsius)
• Remote Dehumidistat (Yes or No)
You will not need to perform this step again after the initial setup.
5. To change the desired humidity setpoint (Settings, Humidity
Setpoint), simply press "Up" (if you prefer air to be less dry)
or "Down" (if you prefer the air to be drier). The same screen
displays on the unit and on the APP. While 40 to 60% is
normally considered ideal and healthy, your comfort is the best
indication of how to set your humidity level.
6. The control displays the number of hours your lter has been
in place. After replacing the lter, press the "Reset Hours"
button to set it to zero (Settings, Filter Hours).
IMPORTANT:
• The lter must be replaced every 6 months.
• Do NOT operate the unit without a lter.
• Turn the power OFF before replacing your lter.
7. The "Auto" fan mode simply indicates that the fan will run
whenever there is a call for dehumidication.
8. When "Cycling" is selected, the unit will run the fan at intervals
of 10, 20 and 30 minutes per hour. This keeps air circulating
throughout the space when a call for dehumidication is not
present.
9. If you have installed a remote control (dehumidistat) for the
unit, you will need to select "Yes" (Settings, Remote
Dehumidistat Installed).
10. The screen will indicate a remote control is connected.
With a remote dehumidistat, you will not be able to control the
dehumidier using Wi-Fi.
!
5
6
7
8
9
10
4