Specification

1 of 2
*Built in the USA using domestic
and foreign parts
Service and non-Service rated
Automatic Smart Transfer Switches
Automatic Transfer Switches
®
Automatic
Transfer Switches
100 - 400 Amps, Single Phase
Description
Generac Automatic Transfer Switches are designed for use with single phase generators that utilize an Evolution™ or Nexus™
Controller. The 100, 200, and 400 amp open transition switches are available in single phase in both service equipment rated and
non-service equipment rated configurations. The 150 and 300 amp open transition switches are only available in a service rated
equipment configuration.
Standard Features
Service rated (RXSW) Generac Automatic Transfer Switches are housed in an aluminum NEMA/UL Type 3R enclosure*, with
electrostatically applied and baked powder paint. The Heavy Duty Generac Contactor is a UL recognized device, designed for
years of service. The controller at the generator handles all the timing, sensing, exercising functions, and transfer commands. All
switches are covered by a 5 year limited warranty.
* Non-service rated (RXSC) switches are housed in a steel enclosure.
DPM Technology
Through the use of digital power technology (DPM), these switches have the capability to manage up to 4 individual HVAC (24 VAC
controlled) loads with no additional hardware. When used in tandem with Smart Management Modules, up to 8 more loads can be
managed as well, providing the most installation efficient power management options available.
*CUL only applies to non-service rated switches
ISO
9001:
2008