Product Manual

Table Of Contents

Operation

14 Automatic Transfer Switch Owner’s Manual

Fuse Removal and Installation

See Figure 4-2. A fuse removal and installation tool (A)

is included in the control housing.

Figure 4-2. Fuse Removal and Installation Tool

If a fuse requires replacement, snap the tool free with an

appropriate tool such as diagonal pliers, and use it to

replace the fuse. The tool can be stored in the control

housing retainer directly above the fuses, with the large

thumb tab facing out.

Use only Generac replacement fuses—part number

100000005117, rated 240 VAC, 6.3 Amps, 10,000 AIC.

Alternative fuses are Littelfuse® 021606.3MXHP or

Optifuse® FCD-6.3.

T1 N1

Replace with Littlefuse 021606.3MXHP,

Optifuse FCD-6.3A or

Generac 10000005117 250 vac, 6.3A

0 GROUND

194 +12V

23 TRANSFER

004776