Product Manual

Safety Rules .................................................Inside Front Cover
General Information .................................................................2
1.1 Introduction ................................................................................ 2
1.2 Equipment Description ................................................................ 2
1.3 Transfer Switch Data Label.......................................................... 2
1.4 Transfer Switch Enclosure ........................................................... 2
1.5 Safe Use Of Transfer Switch........................................................ 2
Installation ............................................................................... 3
2.1 Introduction to Installation ........................................................... 3
2.2 Unpacking .................................................................................. 3
2.3 Mounting .................................................................................... 3
2.4 Connecting Power Source and Load Lines .................................. 3
2.5 Connecting Control Wires ........................................................... 4
2.6 Auxiliary Contacts ....................................................................... 4
Operation ................................................................................. 5
3.1 Functional Tests & Adjustments .................................................. 5
3.2 Manual Operation ........................................................................ 5
3.3 Voltage Checks ........................................................................... 5
3.4 Generator Tests Under Load ........................................................ 7
Notes ....................................................................................... 8
Installation Diagram ..............................................................11

SAVE THESE INSTRUCTIONS! Read the fol-
lowing information carefully before attempt-
ing to install, operate or service this equip-
ment. Also read the instructions and infor-
mation on tags, decals, and labels that may
be affixed to the transfer switch. Replace
any decal or label that is no longer legible.

DANGER! Connection of a generator to an
electrical system normally supplied by an
electric utility shall be by means of suitable
transfer equipment so as to isolate the elec-
tric system from utility distribution system
when the generator is operating (Article 701
Legally Required Standby Systems or Article
702 Optional Standby Systems, as appli-
cable). Failure to isolate electric system by
these means may result in damage to gen-
erator and may result in injury or death to
utility workers due to backfeed of electrical
energy.
The manufacturer cannot anticipate every possible circumstance
that might involve a hazard. The warnings in this manual, and on
tags and decals affixed to the unit are, therefore, not all-inclusive. If
using a procedure, work method or operating technique the manu-
facturer does not specifically recommend, ensure that it is safe for
others. Also make sure the procedure, work method or operating
technique chosen does not render the transfer switch unsafe.
Table of Contents
WARNING!
California Proposition 65
Engine exhaust and some of its constituents are known to the state of California to cause cancer,
birth defects, and other reproductive harm.
WARNING!
California Proposition 65
This product contains or emits chemicals known to the state of California to cause cancer,
birth defects, and other reproductive harm.