Use and Care Manual

Activation and Startup
Owner’s Manual for Spark-Ignited Stationary Generators 13
Activating the Unit
Language
- English +
Up Arrow = (+)
Down Arrow = (-)
Display Reads:
Generator Active is displayed on the
LCD during initial startup. After displaying
firmware and hardware version codes, as
well as other system information, the
Install Wizard is launched, and the
Language screen is displayed.
Use Up arrow or Down arrow to scroll to
desire
d language.
Press ENTER.
If the wrong language is selected, it may be changed
later u
sing the Edit menu.
Activate me (ENT) or
ESC to run in manual
Display Reads:
Press ENTER. Press ESCAPE to abort the activation sequence. NOT
ACTIVATED is displayed and unit will run in MANUAL
only. Disconnect and reconnect the negative battery
cable to restart the activation routine. If power is
removed after a successful activation, no data is lost,
but time and date must be updated.
To Activate go to
www.activategen.com
Display Reads:
Go to www.activategen.com or call 1-
888-9ACTIVATE (922-8482, US & Can-
ada only) if activation passcode is not
available.
If activation pass code is available, wait a
few secon
ds for the next display.
SN 1234567890
PASS CODE XXXXX
Display Reads:
Use Up arrow or Down arrow to
increment or decrement the digit to
correspond to the first number of the
pass code.
Press ENTER.
Repeat step to enter remaining digits.
Press ESCAPE to return to preceding digits if a
corr
ection becomes necessary.
If attempts to enter activation code are unsuccessful,
verify number a
gainst the activation code given on
activategen.com. If it is correct, contact 1-888-
9ACTIVATE (922-8482, US & Canada only).
For
international assistance, call 01-262-953-5155.
Select Hour (0-23)
- 6 +
Display Reads:
Use Up arrow or Down arrow to
increment or decrement the hour. Press
ENTER.
Use Up arrow or Down arrow to
increme
nt or decrement the minute.
Press ENTER.
Use Up arrow or Down arrow to select
the month. Pr
ess ENTER.
Use Up arrow or Down arrow to
increme
nt or decrement the date. Press
ENTER.
Use Up arrow or Down arrow to
increme
nt or decrement the year. Press
ENTER.