Product Manual

Maintenance
Owner’s Manual for Stationary Diesel Generators 27
Access Panels
Access panels are located at both the front and sides of
the enclosure.
Removal
1. See Figure 5-5. Insert key (B) into latch (A) and
turn counterclockwise one-half turn.
Figure 5-5. Access Panel Key
2. Raise panel using thumb latch.
Installation
1. Lower panel into position using thumb latch.
2. Insert key into latch and turn clockwise one-half
turn.
Service Maintenance Intervals
NOTE: Generac recommends using genuine Generac
OEM parts to avoid problems that could affect warranty
coverage.
It is important to perform all maintenance at interval spec-
ified in the Service Maintenance Schedule. This verifies
safe and correct operation, as well as compliance with
applicable emissions standards. Critical emissions main-
tenance must be performed for emissions warranty to
remain valid. Service and repairs may be performed by
any qualified service technician or repair shop.
006370
A
B
(000182a)
WARNING
Equipment damage. Only qualified service personnel may
install, operate, and maintain this equipment. Failure to follow
proper installation requirements could result in death, serious
injury, and equipment or property damage.