Product Manual

Activation and Startup
14 Owner’s Manual for Stationary Diesel Generators
Activate Unit
Display Reads Troubleshooting
Generator Active is displayed on
the LCD screen during initial startup.
After displaying firmware and
hardware version codes, as well as
other system information, Install
Wizard is launched and Language
screen is displayed.
Use UP ARROW or DOWN ARROW
to scroll to desired language.
Press ENTER.
If wrong language is selected, it may be changed
later using the EDIT menu.
Press ENTER. Press ESCAPE to abort activation sequence.
NOT ACTIVATED is displayed and generator will
run in MANUAL only. Disconnect and reconnect
negative battery cable to restart activation
routine. If power is removed after a successful
activation, no data is lost, but time and date must
be updated.
Go to www.activategen.com or
call 1-888-9ACTIVATE (922-
8482, US & CA only) if activation
passcode is not available.
If activation passcode is available,
wait a few seconds for next display.
Use UP ARROW or DOWN ARROW
to increment or decrement digit to
correspond to first number of pass
code. Press ENTER.
Repeat step to enter remaining
digits.
Press ESCAPE to return to preceding digits if a
correction becomes necessary.
If attempts to enter activation code are
unsuccessful, verify number against code given
on www.activategen.com. If it is correct, contact
1-888-9ACTIVATE (922-8482, US & CA only).
• Use UP ARROW or DOWN
ARROW to increment or decre-
ment hour. Press ENTER.
• Use UP ARROW or DOWN
ARROW to increment or decre-
ment minute. Press ENTER.
• Use UP ARROW or DOWN
ARROW to select month. Press
ENTER.
• Use UP ARROW or DOWN
ARROW to increment or decre-
ment date. Press ENTER.
• Use UP ARROW or DOWN
ARROW to increment or decre-
ment year. Press ENTER.
Language
- English +
Up Arrow = (+)
Down Arrow = (-)
Activate me (ENT) or
ESC to run in manual
To Activate go to
www.activategen.com
SN 1234567890
PASS CODE XXXXX
Select Hour (0-23)
- 6 +