Item Brochure

12 of 12
15 • 20 • 30 • 48 • 50 kW available accessories
®
Protector™ Series
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2016 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0K4729-M 08/16/16
Model # Product Description
G006463-4 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from anywhere
that you have access to an Internet connection from a PC or with any smart device. You
will even be notified when a change in the generator’s status occurs via e-mail or text
message. Note: Harness Adapter Kit required. Available in the U.S. only.
G006478-0 Harness Adapter Kit
The Harness Adapter Kit is required to make liquid-cooled units compatible with Mobile
Link™.
G006502-0 Spill Box
The 5-gallon spill box screws into the existing fuel fill port of the base tank. It captures and
contains fuel if over fueling or spilling occurs during the fill process.
G006504-0 90% Fuel Level Alarm
The 90% fuel level alarm alerts the fuel fill operator when the tank reaches a 90% fill level
by sounding an audible alarm and triggering an LED warning light.
G006505-0 - 15 & 20 kW
G006506-0 - 30, 48 & 50 kW
Tank Risers
Tank risers are required in some municipalities to help avoid potential base tank corrosion
caused by mounting on rough surfaces.
G006507-0 Fuel Fill Drop Tube
A powder coat painted, steel fuel fill drop tube is required in some municipalities to prevent
sparking due to static electricity buildup, which can be caused by the fuel dropping into the
tank from the fill area. Using a drop tube also results in submerged filling, which increases
the fuel delivery flow rate and reduces vapors, foam and potential tank evaporation.
G006513-0 - 15 & 20 kW
G006517-0 - 30 kW
G006516-0 - 48 & 50 kW
Stainless Steel Fuel Lines
Some municipalities require the use of stainless steel fuel lines instead of the standard
hoses provided with the diesel generator products. These stainless steel lines are fire
resistant for additional safety.
G006510-0 E-Stop
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an
emergency.
006511-0 Spill Box Drainback Kit
The spill box drainback kit allows fuel that was captured in the 5-gallon spill box to be
drained directly back into the fuel tank to avoid vapors.
G006588-1 Vent Extension Support Kit
The vent extension support kit consists of two aluminum plates with the appropriate
pipe cutouts to secure the vent extension pipes coming through the top of the generator
enclosure. It helps to minimize stress on the NPT fittings integrated on the tank and also
helps protect against pests.
G006512-0 Lockable Fuel Cap
The cast iron, lockable fuel cap provides the ability to lock the fuel system to prevent
unwanted fuel tampering or fuel siphoning.
G006572-0 - 15 & 20 kW
G006571-0 - 30 kW
G006570-0 - 48 & 50 kW
Maintenance Kits
The Protector Maintenance Kits offer all the hardware necessary to perform complete
maintenance on Generac Protector generators.
G006560-0 - 15 & 20 kW
G006559-0 - 30 kW
G006558-0 - 48 & 50 kW
Cold Weather Kits
Recommended for generators installed in regions where the temperature regularly falls
below 32 °F (0 °C). The Cold Weather Kits consist of a block heater with all necessary
mounting hardware and a battery warmer with a thermostat built into the battery wrap.
G005704-0 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint
to protect from future corrosion. The paint kit includes the necessary paint to properly
maintain or touch-up a generator enclosure.
G006664-0 Local Wireless Remote
Completely wireless and battery powered, Generac's wireless remote monitor provides
you with instant status information without ever leaving the house.
G006665-0
Wireless Remote
Extension Harness
Recommended for use with the Wireless Remote on units up to 60 kW, required for use on
units 70 kW or greater.
G006873-0
Smart Management
Module (50 Amps)
Manage large loads by utilizing up to 8 individual Smart Management modules. These
devices are installed directly in line with existing appliance wiring for easy installation.