Instructions / Assembly
Owner’s Manual for Powerwagon 9
General Information and Setup
Know Your Powerwagon
See Figure 2-1. Be familiar with the controls and features
of the unit prior to operation. Read this manual thor-
oughly before assembling and operating this unit. Save
this manual for future and immediate reference.
Emissions
The United States Environmental Protection Agency (US
EPA) (and California Air Resources Board (CARB), for
engines/equipment certified to California standards)
requires that this engine/equipment complies with
exhaust and evaporative emissions standards. Locate
the emissions compliance decal on the engine to deter-
mine applicable standards. For emissions warranty infor-
mation, please reference the included emissions
warranty. It is important to follow the maintenance specifi-
cations in the manual to ensure that the engine complies
with the applicable emissions standards for the duration
of the product’s life.
Assembly
See charts below for list of included parts. Verify all parts
are included before assembly.
Included Parts
Figure 2-2. Included Parts
Handlebar Installation
1. See Figure 2-3. Lift handlebar assembly (A) to
operating position and install 3/8 in - 16 x 1-3/4 in
flange bolt and locknut (B) on each side.
Figure 2-3. Handlebar Installation
NOTE: Verify handlebar flange bolts and lock nuts are
installed as shown in Figure 2-3.
2. Tighten lower handlebar bolts.
Bed Assembly and Installation
1. See Figure 2-4. Place bed assembly (A) at front of
unit, tailgate end resting on ground.
Figure 2-4. Bed Assembly
2. Move bed assembly onto dump arms (B) and
rotate bed backwards and onto dump arms.
Item # Description Qty
1 Bracket, actuator, dump arm 1
2
Bolt, hex, flange, 1/2 in - 13 x 1-1/2 in, GR5,
ZP
1
(000100a)
WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
006153
1
2
3
45
8
6
7
3
Bolt, hex, flange, 3/8 in - 16 x 1-3/4 in, GR5,
ZP
2
4 Bolt, hex, flange, 5/16 in - 18 x 3 in, GR8, ZP 1
5
Bolt, hex, flange, 5/16 in - 18 x 2-1/2 in, GR8,
ZP
4
6 Nut, nylon lock, flanged, 1/2 in - 13 1
7 Nut, nylon lock, flanged, 3/8 in - 16 2
8 Nut, nylon lock, flanged, 5/16 in - 18 5
006734
A
B
006166
A
B