Replacement Part List

Owner’s Manual for Power Grader 5
General Information and Setup
Manual Caddy
Figure 2-5. Manual Caddy
2. Contact your nearest authorized dealer, or contact
Generac Customer Service at 1-888-436-3722 (1-
888-GENERAC), or www.generac.com with the
unit model and serial number for any missing car-
ton contents.
3. Record model, serial number, and date of pur-
chase on front cover of this manual.
Assembly
Installing Tooth Bar
4. See Figure 2-6. Place power grader frame on a flat
surface with weight box straps (A) on top.
Figure 2-6. Weight Box Straps
5. Loosen hardware securing weight box straps to
frame (B) using two 9/16” wrenches.
6. Align holes in weight box straps with crossbar
mounting holes (C).
7.
See Figure 2-7. Secure each strap with a 3/8-16 X
2-1/2" bolt with 3/8" flat washer, rail spacer (D),
and locknut with 3/8” washer using two 9/16"
wrenches.
Figure 2-7. Rail Spacers
8. Tighten all weight box strap hardware
.
9. See Figure 2-8. Position frame assembly with front
tooth bar area (E) facing up.
Figure 2-8. Tooth Bar
10. Remove the four bolts, flat washers and locknuts
(F) securing tooth bar to frame assembly using two
9/16" wrenches.
11. Turn tooth bar around and flip end to end so the
teeth are facing forward. Replace bolts, flat wash-
ers and locknuts. Finger tighten.
Installing Tow Bar
1. See Figure 2-9. Position frame assembly with
tooth bar crossmembers (A) on top.
Figure 2-9. Crossmembers and Tow Bar
Item Description QTY
A Manual Caddy 1
B Washer, Flat, 5/16” USS 4
C Nut, Nylon Lock 5/16”-18 LP 2
D Bolt, HCS, 5/16”-18X3, GR5, ZP 2
006101
A
C
B
D
006104
A
B
C
006142
D
006105
E
F
006106
B
C
A