Operation Manual

General Information
33722 D MMG130DI4/175DI4/205DI4 Operating Manual 13
POWER ZONE™ CONTROLLER
The Power Zone™ controller is an auto start controller that monitors the unit and indicates operational status and
fault conditions. The controller can be programmed to automatically start or stop based on time schedule, fault
condition, or load demand.
The controller constantly monitors vital generator and engine functions for a number of preprogrammed alarm and
fault conditions. When a fault condition occurs, the engine can be shut down automatically and the LCD window will
show the fault that caused the shut down; to resume operation, the fault condition must be resolved.
This controller also records a history of unit performance which may be viewed at any time and will not be lost when
the controller is powered down.
Figure 2-6. Power Zone™ Controller Layout
CONTROLLER FEATURES AND FUNCTIONS
Operator Screens
These buttons are used to enter the various operator screens from any other screen. The operator screens consist
of four screens: Home ( ), Engine ( ), Generator ( ), and Voltage Adjust ( ). For information about the
screens, refer to Operator Screens.
Alarm Mute
The Alarm Mute ( ) button silences the audible alarm. Additional action will be required to fully disable the active
alarm.
1. Navigation buttons 7. Alarm mute
2. Control power switch 8. Voltage adjust
3. Engine start (manual mode) 9. Generator
4. Engine stop/reset 10. Engine
5. Main display 11. Home
6. Auto/manual mode
CONTROL ON
CONTROL OFF
I
O
P
o
w
e
r
Z
o
n
e
™
C
o
n
t
r
o
l
l
e
r
STARTING THE GENERATOR
DAS STARTEN DES GENERATORS
COMIENZO DEL GENERADOR
COMMENCEMENT DU GÉNÉRATEUR
1. PRESS CONTROL POWER
SWITCH “ON”
2. PUSH ENGINE START “I”
CONTROL
CONTROL
ON
ON
CONTROL
CONTROL
OFF
OFF
I
O
STOPPING THE GENERATOR
DAS AUFHÖREN DES GENERATORS
PARADA DEL GENERADOR
ARRÊT DU GÉNÉRATEUR
1. PUSH ENGINE STOP “O”
2. PRESS CONTROL POWER
SWITCH “OFF”
CONTROL
CONTROL
ON
ON
CONTROL
CONTROL
OFF
OFF
I
O
11
10
8
9
6
7
5
1
2
3
4
01780
GEN
V
+
-