Product Manual

30 Owner’s Manual for Mobile Light Tower
Operation
Shutting Down Unit—Analog
Controls
1. Stop using and unplug equipment from the 120 V
convenience receptacles. See Removing Loads
from Receptacles (If Equipped).
2. See Figure 3-20. Switch lights to OFF (O).
Figure 3-20. Lights Switch
3. See Figure 3-21. Switch main AC circuit breaker to
OFF (O).
Figure 3-21. Main AC Circuit Breaker OFF (O)
4. See Figure 3-22. Turn ignition switch to STOP
position.
Figure 3-22. Stop Engine
5. Open unit hood.
6. See Figure 3-23. Switch the flex switch (if
equipped) to position 0.
Figure 3-23. Flex Switch—Position 0
7. Close unit hood.
Shutting Down Unit—Power
Zone Controls (MANUAL Mode)
1. Remove all loads from receptacles. See Remov-
ing Loads from Receptacles (If Equipped).
2. See Figure 3-24. Switch OFF (O) lights by
pressing the light ON-OFF buttons.
Figure 3-24. Light Fixture ON-OFF Buttons
3. See Figure 3-25. Switch main AC circuit breaker to
OFF (O).
Figure 3-25. Main AC Circuit Breaker OFF (O)
4. See Figure 3-26. Press the engine START-STOP
button once.
Figure 3-26. Engine START-STOP Button
NOTE: Engine begins cool-down cycle, shutting off when
engine is sufficiently cool.
NOTE: To skip cool-down cycle, press the ENGINE
START-STOP button twice instead of once.
5. See Figure 3-27. Switch controller power switch to
OFF (O).
Figure 3-27. Controller Power—OFF (O)
010586
010587
MAIN AC
CIRCUIT
BREAKER
010594
010595
Light 1
Light 2
Light 4
Light 3
010579
010587
MAIN AC
CIRCUIT
BREAKER
010582
010596