Installation Guide

Diagrams
Installation Guidelines For Australian 50 Hz Air-Cooled Generators 51
Section 11: Diagrams
Installation Drawing (10000010257-B—1 of 2)
635
[25.0]
733
[28.8]
648
[25.5]
218
[8.6]
345
[13.6]
521
[20.5]
457
[17.9]
197
[7.7]
393
[15.5]
68
[2.7]
LEFT SIDE VIEW
REAR VIEW
FUEL INLET - 1/2" NPT
REQUIRED FUEL PRESSURE : NATURAL GAS : 0.87-1.74 kPa
LIQUID PROPANE (VAPOR) : 2.49-2.99 kPa
MAIN AC/CONTROL WIRING HOLE FOR 3/4" CONDUIT
MAIN AC/CONTROL WIRING HOLE FOR 1 1/4" CONDUIT
WIRELESS MODULE
BOLTS RECOMMENDED
10 [3/8] DIA. MASONRY ANCHOR
HOLE (3) PLACES,
16 [5/8] DIA. CLEARANCE
A CONCRETE PAD
OPTIONAL MOUNTING TO
HOLE LOCATIONS FOR
FRONT OF UNIT
MOUNTING TO CONCRETE PAD
-REMOVE FACTORY PLUGS AND DISCARD
-CLOSE ANY UNUSED HOLE WITH A NEMA
3R RATED PLUG (FIELD SUPPLIED)
()