Installation Guide

Fuel Conversion / Gas Connections

Installation Guidelines For Australian 50 Hz Air-Cooled Generators 29

Natural Gas Vapor Installation (typical)

Figure 5-9. Natural Gas Vapor Installation (typical)

NOTE: Fuel Field Kit not shown. Install according to local codes and regulations.

NG Megajoules = m

/h X 37.26

NG BTU = ft

/h X 1000

A BTU and pressure decal

B Minimum distance from rear obstruction—see Site Selection

C Manual shutoff valve (pressure port optional)

D Pipe nipple (field supplied)

E Flexible fuel line

F Check distance with gas provider

GClamp

H Reinforcing rod

J Size gas meter for 100% generator load plus all appliance loads

K For underground installations, verify piping system for code compliance

LGas main

001808