Installation Guide

Control Panel Start-Up/Testing
36 Installation Guidelines For Australian 50 Hz Air-Cooled Generators
installation wizard will operate upon power restoration.
The display will only prompt the customer for the current
Time and Date.
* This is required in addition to setting the fuel selector
knob to the correct fuel for the generator to function prop-
erly.
Table 7-1. Activation Chart
Display Reads Troubleshooting
Use arrow keys to
scroll to desired
language.
Press ENTER to
select.
Language can be changed later using
the EDIT menu.
Use arrow keys to
either enable or
disable Wi-Fi.
If YES, refer to the
Wi-Fi manual.
If NO, continue.
Press ENTER to begin
the activation process.
If ESCAPE is pressed instead of
ENTER, the generator will only run in
manual mode (for test purposes) and
NOT ACTIVATED will be displayed. To
prepare the controller for step 1,
remove the 7.5 amp generator control
panel fuse AND disconnect the T1, N1,
and N2 connector in the external
connection box (if equipped); or
disconnect utility input (main breaker)
to the transfer switch for 3–5 seconds
and reconnect.
Language
- English +
002227
Enable Wi-Fi?
- Yes +
004498
Activate me (ENT) or
ESC to run in manual
002228