Installation Guide

Fuel Conversion / Gas Connections

30 Installation Guidelines For Australian 50 Hz Air-Cooled Generators

LP Vapor Installation (typical)

Figure 5-10. LP Vapor Installation (typical)

NOTE: Fuel Field Kit not shown. Install according to local codes and regulations.

LP BTU = ft

/h X 2500

Megajoules = m

/h X 93.15

A BTU and pressure decal

B Minimum distance from rear obstruction

C Manual shutoff valve (pressure port optional)

D Pipe nipple (field supplied)

E Flexible fuel line

F Check distance with gas provider. See Site Selection.

G Reinforcing rod

H Clamp

J Secondary fuel pressure regulator

K Manual shutoff valve

L Primary fuel pressure regulator

M Fuel tank—sized large enough to provide required BTUs for generator and

ALL connected appliance loads. Be sure to correct for weather evaporation.

001809