Installation Guide

Unpacking and Inspection
Installation Guidelines For Australian 50 Hz Air-Cooled Generators 7
Section 2: Unpacking and Inspection
General
NOTE: Carefully inspect the contents for damage after
unpacking. It is advised to unpack and inspect the unit
immediately upon delivery to detect any damage that
may have occurred in transit. Any claims for shipping
damage need to be filed as soon as possible with the
freight carrier. This is especially important if the generator
will not be installed for a period of time.
• This standby generator set is ready for installation
with a factory supplied and pre-mounted base pad
and has a weather protective enclosure that is
intended for outdoor installation only.
• If any loss or damage is noted at time of delivery,
have the person(s) making the delivery note all
damage on the freight bill or affix their signature
under the consignor’s memo of loss or damage.
• If a loss or damage is noted after delivery, separate
the damaged materials and contact the carrier for
claim procedures.
• “Concealed damage” is understood to mean dam-
age to the contents of a package that is not evident
at the time of delivery, but is discovered later.
Required Tools
• General SAE and Metric hand tools
– Wrenches
– Sockets
– Screwdrivers
• Standard electrician’s hand tools
– Drill and bits for mounting and routing conduits
• 4 mm hex key (for access to customer connec-
tions)
• 3/16 in hex key (test port on fuel regulator)
• Manometer (for fuel pressure checks)
• Meter capable of measuring AC/DC voltage and
frequency
• Torque wrenches
Unpacking
1. Remove outer shipping carton.
2. See Figure 2-1. Remove the wood frame.
Figure 2-1. Crated Generator
3. See Figure 2-2. The lid will be locked. When
shipped in original packaging from the factory, a
set of keys is attached to the cardboard sheet on
top of the generator set. An additional set is
attached to the pallet bracket on the front intake
end of the generator set.
Figure 2-2. Keys As Shipped
4. Remove the keys from the cardboard and pallet
bracket.
5. Use the keys to open the generator lid.
NOTE: The enclosed keys provided with this unit are
intended for service personnel only.
000427
006729