user manual

44
Appendix
Gigaset 4010 Classic, GBR, A31008-G4010-J101-1-7619
anha.fm
12.07.01
Guarantee
Over the guarantee period from the date of purchase from the stock-
ist, Siemens AG will rectify all material or manufacturing defects by re-
pairing or replacing the defective device.
As of 01.01.2002, the European guarantee period will be 12 months.
The guarantee does not cover damage caused by improper use, wear
and tear or third party access. The guarantee shall not cover consum-
ables or defects which only slightly decrease the value or serviceability
of the device.
Service:
www.siemens.com/troubleshooting
The ringer/dialling
tone cannot be
heard.
You have changed
the telephone cord
on your Gigaset.
Ensure, when purchasing
a new cord, that it has
the correct pin assign-
ment (3-4 assignment of
the telephone leads/
EURO CTR37).
Error beep is gen-
erated (descend-
ing tone se-
quence)
Wrong input Repeat the procedure;
note the display and, if
necessary, refer to the
operating instructions.
Abu Dhabi:
Siemens hotline [phone]
Egypt
Siemens hotline [phone]
Ivory Coast
Siemens hotline [phone]
Kuwait
NGEECO 481 87 49
Morocco
Setel S.A. 22 669232
Oman
Siemens hotline 79 10 12
Pakistan
Siemens hotline [phone]
Republic of
South Africa
Siemens hotline [phone]
Saudi Arabien
Siemens hotline [phone]
Tunisia
Siemens hotline [phone]
Fault Possible cause Solution