Operating Guide

ii Owner’s Manual for 60 Hz Air-Cooled Generators

Use this page to record important information about this generator.

Record the information found on the unit data label on this

page. See General Information for the location of the unit

data label. The unit has a label plate affixed to the inside par-

tition, to the left of the control panel console as shown in Fig-

ure 2-1, Figure 2-2, or Figure 2-3. See Operation for

directions on how to open the top lid and remove the front

panel.

Always supply the complete model and serial numbers of the

unit when contacting an Independent Authorized Service

Dealer (IASD) about parts and service.

Operation and Maintenance: Correct maintenance and

care of the unit ensures a minimum number of problems, and

keeps operating expenses at a minimum. It is the operator’s

responsibility to perform all safety inspections, to verify all

maintenance for safe operation is performed promptly, and

to have the equipment inspected periodically by an IASD.

Normal maintenance, service, and replacement of parts are

the responsibility of the owner/operator and are not consid-

ered defects in materials or workmanship within the terms of

the warranty. Individual operating habits and usage may con-

tribute to the need for additional maintenance or service.

When the generator requires servicing or repairs, Generac

recommends contacting an IASD for assistance. Authorized

service technicians are factory-trained and are capable of

handling all service needs. To locate the nearest IASD,

please visit the dealer locator at:

www.generac.com/Dealer-Locator.

Model:

Serial:

Production Date:

Volts:

LPV Amps:

NG Amps:

Hz:

Phase:

Controller P/N:

STA MAC ID:

SSID:

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM