Replacement Part List
6 of 6
®
Model # Product Description
G007101-0 Battery Pad Warmer Pad warmer rests under the battery. Recommended for use if temperature regularly falls below 0 °F (-18 °C). (Not nec-
essary for use with AGM-style batteries).
G007102-0 Oil Warmer Oil warmer slips directly over the oil filter. Recommended for use if temperature regularly falls below 0 °F (-18 °C).
G007103-1 Breather Warmer Breather warmer is for use in extreme cold weather applications. For use with Evolution controllers only in climates where
heavy icing occurs.
G005621-0 Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load that may not be
needed. Not compatible with 50 amp pre-wired switches.
G007027-0 - Bisque Fascia Base Wrap Kit
(Standard on 22/24 kW)
The fascia base wrap snaps together around the bottom of the new air-cooled generators. This offers a sleek, contoured
appearance as well as offering protection from rodents and insects by covering the lifting holes located in the base.
G005703-0 - Bisque Touch-Up Paint Kit If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from future corrosion.
The touch-up paint kit includes the necessary paint to correctly maintain or touch up a generator enclosure.
G006485-0 Scheduled Maintenance Kit Generac's scheduled maintenance kit provides all the items necessary to perform complete routine maintenance on a
Generac automatic standby generator (oil not included).
G007005-0 Wi-Fi LP Tank Fuel Level
Monitor
The Wi-Fi enabled LP tank fuel level monitor provides constant monitoring of the connected LP fuel tank. Monitoring the
LP tank's fuel level is an important step in verifying the generator is ready to run during an unexpected power failure. Sta-
tus alerts are available through a free application to notify users when the LP tank is in need of a refill.
G007000-0 (50 amp)
G007006-0
(100 amp)
Smart Management Module Smart Management Modules (SMM) are used to optimize the performance of a standby generator. It manages large elec-
trical loads upon startup and sheds them to aid in recovery when overloaded. In many cases, using SMM’s can reduce
the overall size and cost of the system.
G007169-0 - 4G LTE
G007170-0 - Wi-Fi/
Ethernet
Mobile Link
®
Cellular
Accessories
The Mobile Link family of Cellular Accessories allow users to monitor generator status from anywhere in the world, using
a smart phone, tablet, or PC. Easily access information such as the current operating status and maintenance alerts. Us-
ers can connect an account with an authorized service dealer for fast, friendly, and proactive service. With Mobile Link,
users are taken care of before the next power outage.
G007220-0 - Bisque Base Plug Kit Base plugs snap into the lifting holes on the base of air-cooled home standby generators. This offers a sleek, contoured
appearance, as well as offers protection from rodents and insects by covering the lifting holes located in the base. Kit
contains four plugs, sufficient for use on a single air-cooled home standby generator.
Dimensions & UPCs
Dimensions shown are approximate. See installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in
]
1218 mm
[48.0 in]
LEFT SIDE VIEW FRONT VIEW
Model UPC
G007038-1 696471074185
G007038-3 696471074185
G007039-1 696471074192
G007039-3 696471074192
G007042-2 696471074208
G007042-3 696471074208
G007043-2 696471074215
G007043-3 696471074215
G007209-0 696471071511
G007210-1 696471084801
20/22/24 kW
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2021 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No. A0000937814 Rev. D 04/14/2021
®
20/22/24 kW Available Accessories