Operating Guide

ii Owner’s Manual for 60 Hz Air-Cooled Generators

Use this page to record important information about this generator.

Model:

Serial:

Production Date:

Volts:

LPV Amps:

NG Amps:

Hz:

Phase:

Controller P/N:

STA MAC ID:

SSID:

Record the information found on the unit data label on this

page. See General Information for the location of the unit

data label. The unit has a label plate affixed to the inside par-

tition, to the left of the control panel console as shown in Fig-

ure 2-1 or Figure 2-3. See Operation for directions on how

to open the top lid and remove the front panel.

Always supply the complete model and serial numbers of the

nit when contacting an Independent Authorized Service

Dealer (IASD) about parts and service.

Operation and Maintenance:

Correct maintenance and

care of the generator ensures a minimum number of prob-

lems and keeps operating expenses at a minimum. It is the

operator’s

responsibility to perform all safety inspections, to

verify all maintenance for safe operation is performed

promptly, and to have the equipment inspected periodically

by an IASD. Normal maintenance, service, and replacement

of parts are the responsibility of the owner/operator and are

not considered defects in materials or workmanship within

the terms of the warranty. Individual operating habits and

usage may contribute to the need for additional maintenance

or service.

When the generator requires servicing or repairs, Generac

ecommends contacting an IASD for assistance. Authorized

service technicians are factory-trained and are capable of

handling all service needs. To locate the nearest IASD,

please visit the dealer locator at:

www.generac.com/Service/DealerLocator/.

(000393a)

WARNING

CANCER AND REPRODUCTIVE HARM