Specifications Sheet

6 of 6
Model # Product Description
G007005-0 Wi-Fi LP Fuel Level Monitor
The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the connected LP fuel tank. Mon-
itoring the LP tank's fuel level is an important step in making sure your generator is ready to run during an
unexpected power failure. Status alerts are available through a free application to notify when your LP tank
is in need of a refill.
G005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended 26R wet
cell battery for use with all air-cooled standby product (excluding PowerPact®).
G007101-0 Battery Pad Warmer
The pad warmer rests under the battery. Recommended for use if the temperature regularly falls below
0 °F (-18 °C). (Not necessary for use with AGM-style batteries).
G007102-0 Oil Warmer
O il warmer slips directly over the oil filter. Recommended for use if the temperature regularly falls below 0 °F
(-18 °C)
.
G007103-1 Breather Warmer
The breather warmer is for use in extreme cold weather applications. For use with Evolution controllers
only in climates where heavy icing occurs.
G005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electrical load
you may not need. Not compatible with 50 amp pre-wired switches.
G007027-0 - Bisque
Fascia Base Wrap Kit
(Standard on 22 kW)
The fascia base wrap snaps together around the bottom of the new air cooled generators. This offers a
sleek, contoured appearance as well as offering protection from rodents and insects by covering the lifting
holes located in the base.
G005703-0 - Bisque Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch up the paint to protect from
future corrosion. The paint kit includes the necessary paint to properly maintain or touch up a generator
enclosure.
G006485-0
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete routine
maintenance on a Generac automatic standby generator.
G006873-0
Smart Management Module
(50 Amps)
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to increase its
power management capabilities. It provides additional power management flexibility not found in any other
power management system.
16/20/22 kW available accessories
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2018 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Part No. 10000000194-H (8/01/18)
®
dimensions & UPCs
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
648 mm
[25.5 in]
727.2 mm
[28.6 in]
637.6 mm
[25.1 in]
1232 mm
[48.5 in ]
1218 mm
[48.0 in]
LEFT SIDE VIEW
FRONT VIEW
Model UPC
G007035-1 696471074161
G007036-1 696471074154
G007037-1 696471074178
G007038-1 696471074185
G007039-1 696471074192
G007042-2 696471074208
G007043-2 696471074215
16/20/22 kW