Spec Sheet

4 of 5
®
Transfer Switch Features

Electrically operated, mechanically-held contacts for fast, positive
connections.

Rated for all classes of load, 100% equipment rated, both inductive
and resistive.

2-pole, 240 VAC contactors.

60 millisecond transfer time.

NEMA 1 (indoor rated) enclosure is standard.

Multi listed for use with 1" standard, tandem, GFCI and AFCI breakers
from Siemens, Murray, Eaton, and Square D for the most flexible and
cost effective install.

Flush mountable.
7.5 kW
*Function of controller
Model G006998-1
No. of poles 2
Current rating (amps) 50
Voltage 120/240 1Ø
Utility voltage monitor (fixed)*
—Pick-up
—Dropout
80%
65%
Return to utility* Approx. 15 sec
Exerciser weekly for 12 minutes* Standard
ETL or UL Listed Standard
Total of pre-wired circuits
No. 15 A 120 V
No. 20 A 120 V
No. 20 A 240 V
No. 30 A 240 V
No. 40 A 240 V
No. 50 A 240 V
8
5
1
-
1
-
-
Tandem breaker capability 8 spaces
Circuit breaker protected
Available RMS symmetrical
fault current @ 240 V
10,000
Weight (lb / kg) 20 / 9.1
Installation whips included No
Dimensions
Mechanical Dimensions
Height Width
Depth
H1 H2 W1 W2
in 11.5 14.8 11 14.4 4
cm 29.2 37.5 28.0 36.6 10.0
Wire Ranges
Neutral Lug Ground Lug
2/0 - #14 2/0 - #14
H1
W1
D
W2
H2
Transfer SwitchPowerPact
®
System - 7.5 kW