Product Manual A
Table Of Contents
- Table of Contents
- Safety
- General Information
- Operation
- Light Tower Set Up
- Raising the Mast
- Raising the Mast with Electric Winch Option
- Starting the Unit
- Light Operation
- Derating for Altitude
- Wet Stacking
- Control Panel Receptacles
- Shutting Down the Unit
- Automatic Shutdown
- Lowering the Mast - Manual
- Lowering the Mast - Electric Winch Option
- Towing the Unit
- Lifting and Tie Down
- Maintenance
- Troubleshooting
- Wiring Diagrams
- Options & Accessories
- Service Log
- Notes
17973 G MLT6SM/K-8SK Operating Manual 45
Section 7 - Options & Accessories
LOWER RADIATOR HOSE HEATER OPTION - USE AND MAINTENANCE
CAUTION
Improper use of the lower radiator hose heater could result in damage to the engine or
personal injury. Do not modify the location of the lower radiator hose heater.
The following points should be followed when operating a unit equipped with a lower radiator hose heater.
• Ensure the cooling system is full of the proper mixture of water and engine coolant before each heater use.
• The heater is designed for all-night operation, however, 2-5 hours of heating just prior to starting is usually
sufficient for proper engine starting.
• The unit must be level to maintain proper orientation of the heater while it is in operation.
• Use only an undamaged, outdoor rated, three-prong grounded 120VAC extension cord with a minimum
amperage rating of 10A. Connect the cord to a properly grounded 120VAC, GFCI receptacle.
• Before starting the engine, unplug the extension cord from the power first, then unplug the heater cordset
from the extension cord.