Product Manual

Owner’s Manual for Dry-Prime Diesel Trash Pumps 25
Operation
The default settings are:
Com Viewer
Displays CANbus data received and engine configuration
transmitted by the ECU.
.
Figure 3-21. Com Viewer Menu
J1939 Viewer
This screen provides a hexadecimal dump of the mes-
sages received on the CANbus. This viewer displays the
raw data. To see the decoded data, use the Db Viewer.
.
Figure 3-22. J1939 Viewer Menu
Button 1 freezes the display while button 2 shows
the CANbus data statistics screen.
Figure 3-23. J1939 Viewer Menu
Engine Configuration
This screen displays the engine configuration information
received from the ECU. Button 2 selects the next page
of engine configuration while button 1 selects the
previous page.
Figure 3-24. Engine Config Menu
J1939 Settings
This screen allows adjustments specific to the J1939 data link.
Figure 3-25. J1939 Settings Menu
Setting US Metric
Language English
Button Beep On
Service Timers Off
Display Mode Analog Gauges
Gauge Pages Defaults
Quad Adjust On
Demo Mode 0 (Off)
Engine Source 0
Display CAN Address 40
Alarm Filter Glb
SPN Version 1
Speed Source Auto
PIN Entry Off
PIN 1111
Max Gauge RPM 2500
Max Gauge Speed 40 MPH 60 km/h
Speed Units MPH km/h
Distance Units Miles km
Pressure Units PSI kPa
Volume Units Gal l
Temperature Units ºF ºC
Stop Stats