Product Manual

14 Owner’s Manual for Dry-Prime Diesel Trash Pumps
General Information
Hood Operation
Figure 2-13. Hood Latches
NOTE: Pump enclosures are optional.
To open the rear hood:
1. Verify there is proper clearance to accommodate
swing of hood to the full-open position.
2. Release hood latches.
3. Stand at the rear of the unit and firmly grasp the
handle at the rear of the hood and slowly tilt the
hood rearward until fully open.
NOTE: Pump hoods are heavy. Use caution when
opening or closing.
To close the rear hood:
1. Verify all contact surfaces for hood are clean of
debris.
2. Stand at the rear of the unit and firmly grasp the
handle at the rear of the hood and slowly tilt the
hood forward until fully closed.
3. Verify hood has fully seated and secure the hood
latches.
002312
WARNING
Pinch Point. Hood could slam shut. Keep
hands and fingers clear. Failure to do so
could result in death or serious injury.
(000267)