Product Manual B

Magnum Power Products – 800.926.9768 – www.magnumpower.com
MTP4000DZV
MTP4000DZ
Deutz D 2.9 L4 – water-cooled, naturally aspirated diesel engine
48.8 hp @ 2600 rpm
4 cylinder
2.9 Liter displacement
DOC only for exhaust after treatment
Tier 4 Final approved
Steel, single wall fuel tank
110 gallon capacity / 95 gallons usable
Fuel consumption at prime:
100% - 2.93 gph
Cooling system capable of operating at 120 F ambient
Disposable air filter – paper element
720 CCA wet cell battery
95 Amp alternator
Low coolant warning/shutdown
Cornell Pump Dry Prime, centrifugal pump
Cornell 4NNTL
4.00” NPTF – suction & discharge connection
Cast Iron ASTM A48 Class 30 pump casing
Cast Iron ASTM A48, Class 30 impeller
2 vane, enclosed impeller
Impeller design incorporated with deflector vanes and pumpout vanes
Single mechanical seal, John Crane Type 1 & 2, with tungsten carbide vs silicon carbide faces
Replaceable wear ring
Run-dry system for continuous operations without need for external flush water or venting
Pump shaft - 1144 stress proof steel
Venturi-Prime – Bendix Compressor flow up to 13.2 CFM
Pump output – 1450 gpm (5489 Lpm)
Lift suction – 28 ft. (8.5 m)
Maximum diameter of solids – 3.00” (76.2 mm)
Impeller diameter: 8.25 inches (20.96 cm)
Maximum Efficiency (BEP Percent) – 79%
BEP Flow – 964 gpm (3649 Lpm)
Total dynamic head – 165 ft (50.29 m)
Duty Points:
 700 gpm @ 56.9-ft TDH @ 1800 RPM, 78% efficiency, NPSHR 10.2 ft
 1000 gpm @ 104-ft TDH @ 2500 RPM, 79% efficiency, NPSHR 13.8 ft
Trash Pump
1 of 2
Engine
Pump
Pump
Performance