Product Manual A

General Information
26 MTP4000-6000DZV/DZD Operating Manual 31609 A
interval. The service timer descriptions can be changed using the CANplus Configurator.
Note: It is not possible to set the service timers if engine hours are not being received by the display.
SYSTEM MENU
The System menu allows the user to configure items affecting how the system
functions. Button 4 cycles through the available values for the selected item.
Demo
The display supports several demo modes to operate with simulated data. Mode
1 simulates speed data and engine parameters. Mode 2 only simulates engine
parameters. Mode 3 simulates speed data, engine parameters and alarms. Mode
0 disables Demo mode. Demo is automatically set to 0 (Off) if live data is received.
Restore Defaults
This allows resetting of all configuration information to default US or Metric
units. Additionally, the display is reset to the initial configuration.
The default settings are:
Setting US Metric
Language English
Button Beep On
Service Timers Off
Display Mode Analog Gauges
Gauge Pages Defaults
Quad Adjust On
Demo Mode 0 (Off)
Engine Source 0
Display CAN Address 40
Alarm Filter Glb
SPN Version 1
Speed Source Auto
PIN Entry Off
PIN 1111
Max Gauge RPM 2500
Max Gauge Speed 40 MPH 60 km/h
Speed Units MPH km/h
00356
50 Hour Service Off
250 Hour Service Off
500 Hour Service Off
2000 Hour Service Off
00357
00358
US Met