Product Manual A

General Information
31609 A MTP4000-6000DZV/DZD Operating Manual 25
Language Menu
This menu allows the user to choose between English, Swedish, French, German,
Spanish, Italian, Dutch and Portuguese. The currently selected value is indicated by
the check mark . Button 4 selects the highlighted value.
Button Beep
The soft buttons emit an audible beep when this item is On. Button beep is disabled
by setting this item to Off. The audible beep still sounds when an alarm occurs. Button
4 cycles between On and Off.
Gauges Menu
This menu allows the user to configure aspects of the gauges displayed. Button 3
selects the previous value while button 4 selects the next value of the
highlighted item.
Max RPM
Sets the full scale RPM indicated by the tachometer gauge.
RPM 2500, 3000, 3500, 4000, 4500, 5000, 6000, 7000, 8000 or 9000
Max Speed
Sets the full scale speed indicated by the speedometer gauge.
MPH 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 70, 75, 80, 85, 95 or 100
km/h 20, 30, 40, 50, 60, 70, 80, 90, 100, 110, 120, 130, 140, 150 or 160
Quad Adjust
Allows the user to disable Adjust mode of the Analog and Digital Gauge Pages. Button 3 disables while button
4 enables Quad Adjust. Disabling Adjust mode locks the current gauge configuration and prevents the operator
from accidentally changing the gauge configuration.
Voltmeter
Leave setting at the 12V factory default. (24V is not available on this unit.)
Service Timers
Sets the 16 service intervals in hours and resets the service timer. Setting the service interval to 0 disables the timer
and the word Off is displayed.
Pressing button 4 allows adjusting the selected service timer.
Button 1 decreases the service interval time while button 2 increases the service interval time in 10 hour
increments. Holding button 3 for approximately three seconds resets Next Service In to the current service
00354
00355
HOLD
RESET