Specification
5 of 5
®
Generac Power Systems, Inc. • S45 W29290 HWY. 59, Waukesha, WI 53189 • generac.com
©2015 Generac Power Systems, Inc. All rights reserved. All specifications are subject to change without notice. Bulletin 0197980SBY-K Printed in U.S.A. 04/14/15
Dimensions shown are approximate. Refer to installation manual for exact dimensions. DO NOT USE THESE DIMENSIONS FOR INSTALLATION PURPOSES.
Model # Product Description
006463-3 Mobile Link™
Generac's Mobile Link allows you to check the status of your generator from anywhere that you
have access to an Internet connection from a PC or with any smart device. You will even be
notified when a change in the generator’s status occurs via e-mail or text message.
005819-0 26R Wet Cell Battery
Every standby generator requires a battery to start the system. Generac offers the recommended
26R wet cell battery for use with all air-cooled standby product excluding PowerPact®.
006212-0 Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), a cold weather kit is required to maintain
optimal battery and oil temperatures. Kit consists of a battery warmer and oil filter heater with
built-in thermostats.
005621-0
Auxiliary Transfer Switch
Contact Kit
The auxiliary transfer switch contact kit allows the transfer switch to lock out a single large electri-
cal load you may not need. Not compatible with 50 amp pre-wired switches.
005839-0 Fascia Base Wrap Kit
The fascia base wrap snaps together around the bottom of the new air cooled generators. This
offers a sleek, contoured appearance as well as offering protection from rodents and insects by
covering the lifting holes located in the base.
005703-0 Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to protect
from future corrosion. The paint kit includes the necessary paint to properly maintain or touch-up a
generator enclosure.
006482-0 - 8 kW
006483-0 - 11 kW
Scheduled Maintenance Kit
Generac's scheduled maintenance kits provide all the hardware necessary to perform complete
routine maintenance on a Generac automatic standby generator.
006664-0 Wireless Remote Monitor
Completely wireless and battery powered, Generac's wireless remote monitor provides you with
instant status information without ever leaving the house. Not compatible with CorePower or
EcoGen systems.
006873-0
Smart Management Module
(50 Amps)
Smart Management Modules are used in conjunction with the Automatic Transfer Switch to
increase its power management capabilities. It provides additional power management flexibility
not found in any other power management system.
8/11 kW available accessories
dimensions & UPCs
®
8/11 kW
731.9 mm
[28.8 in]
637.6 mm
[25.1 in]
LEFT SIDE VIEW
642 mm
[25.3 in]
1218 mm
[47.9 in]
FRONT VIEW
1226 mm
[48.3 in]
Model UPC
006245-0 696471062458
006237-0 696471062373
006439-1 696471064391
006437-1 696471064377
006438-2 696471064384
006720-0 696471067200