Use and Care Manual

Appendix

6.1 MENU SYSTEM NAVIGATION

To get to the MENU, use the "Esc" key from any page. It may need

to be pressed many times before getting to the menu page. The

currently selected menu is displayed as a flashing word. Navigate

to the menu required by using the +/- keys. When the menu

required is flashing, press the ENTER key. Depending on the menu

selected, there may be a list of choices presented. Use the same

navigation method to select the the desired screen (refer to the

Menu System diagram).

6.1.1 CHANGING SETTINGS (EDIT MENU)

To change a setting such as display contrast, go to the EDIT menu

and use the +/- keys to navigate to the setting to change. Once

this setting is displayed (e.g. Contrast), press the ENTER key to go

into the edit mode. Use the +/- keys to change the setting, press

the ENTER key to store the new setting.

NOTE:

If the ENTER key is not pressed to save the new setting, it will

only be saved temporarily. The next time the battery is discon-

nected, the setting will revert back to the old setting.