Manual

Generec Portable Products 2100 PSIPressureW_sher
SPECIFICATIONS
Outlet Pressure ..... 2100 psT
Flow Rate .......... 2,0 g_llons per minute (gpm)
De_rgent .......... Use detergent approved for
pressure washers
Wa_r Supply ...... Not to Exceed 100°F
Temperature
Automatic Cool .... Will cycle when w_ter
Down System re_ches 125°=155°F
ShippingWelght .... 54 Ibs.
GENERAL MAINTENANCE
RECOMMENDATIONS
The pressure washer warrr_nL7 does not cover items that
have been subiec_ed to operator abuse or negligence.To
receive full wlue from the w_rrenty, the operator must
mr_in_in the pressure washer _ instructed in this manual.
• Some _dlustments will need _o be m_de periodically to
properly main_in your pressure w_sher.
• All maintenance in _his manu_l and _he engine owner's
m_nual should be made at least once e_ch season.
• Once a year you should clean or replace the sparl< plug,
clean or replace _he _ir filter and checl<the spray gun
_nd _djus_ble nozzle extension _ssembly for wear.A
new sparl< plug and clean air filter _ssure proper fuel-_ir
mixture and help your engine run be_er and I_st longer.
Please refer _o your engine owner's m_nu_l for more
devils.
• If equipped with inflatable tires, keep the air pressure _t
_he v_lue m_rl(_d on _he _ire or within 15 _nd 40 psi.
Before Each Use
I. Check engine oil level.
2. Check water inlet screen for damage.
3, Check in-line filter for d_mage.
"t. Check high pressure hose for leal<s.
5. Check chemical injection hose and fll_er for damage.
6. Check spray gun and _djus_ble nozzle extension
zssembly for le_ks.
7. Rinse out g_rden hose _o flush out debris.
PRESSURE WASH ER
MAINTENANCE
Check and Clean Inlet Screen
Exr_mine1:hescreen on the water inlet. Cler_n it if the
screen is clogged or replace it it"screen is dr_maged.
Check Hish Pressure Hose
The high pressure hose can develop le_ks from wear,
kinl<ing, or _buse. Inspect the hose each _ime before using
it. Check for cuts, leal<s,_br_sions or bulging of cover,
d_mage or movement of couplings. If any of _hese
conditions exist, replace _he hose immediately.
Check Chemical Iniection Hose
Exr_mine1:hef_l_er on the detergent tube r_ndcle_n if
clogged.The tube should fit tightly on the b_rbed fitting.
Exr_mine1:hetube for leal<sor refers. Replace the filter or
_ube if either is d_maged.
Check Gun and Adjustable Nozzle
Extension
Exr_mine1:hehose connection to the spray gun and mr_ke
sure it is secure.Test 1:hetrigger by pressing it r_ndmr_l<ing
sure it "springs b_ck" into pl_ce when you release it. Put
1:hesafety latch in the ON position and test the trigger.You
should not be _ble _o press the trigger.
/
II