Owner's manual

SPECIFICATIONS
Rated Pressure ..... 2,700 psi
Flow Rate .......... 2.5 gallons per minute (gpm)
Detergent .......... Use detergent approved for
pressure washers
Water Supply Temp Not to Exceed 100°F
Automatic Cool Will cycle when water
Down System ....... reaches 125%155°F
Shipping Weight .... 91 lbs.
GENERAL MAINTENANCE
RECOMMENDATIONS
The pressure washer warranty does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must maintain the
high pressure washer as instructed in this manual.
• Some adjustments will need to be made periodically to
properly maintain your high pressure washer. Check the
spray gun and adjustable nozzle extension assembly for wear.
• All maintenance in this manual and the engine owner's
manual should be made at {east once each season.
• Once a year you should clean or replace the spark plug,
clean or replace the air filter. A new spark plug and dean
air filter assure proper fue]-alr mixture and help your
engine run better and last longer. Please refer to your
engine owner's manual for more details.
BEFORE EACH USE
• Check engineoit level.
Check water inlet screen for damage.
Check in-line filter for damage.
Check high pressure hose for leaks.
Check detergent siphoning tube and filter for damage.
Check spraygun and nozzle extension assemblyfor leaks.
Rinseout garden hose to flush out debris before
connecting to pressure washer.
PRESSURE WASH ER
MAINTENANCE
Check and Clean Inlet Screen
Examine the screen on the water inlet. Clean it if the
screen isclogged or replace it if screen isdamaged.
Check High Pressure Hose
The high pressure hose can develop leaksfrom wear,
kinking, or abuse.Inspectthe hose each time before using
it. Check for cuts, leaks,abrasions or bulging of cover,
damageor movement of couplings. If any of these
conditions exist, replace the hose immediately.
_hL CAUTION! Water spraying from a leak is
capable of injectingmaterial into skin. Inspecthose
each time before using it_ Never repair a high
pressure hose. Replace it with another hose that
exceeds the maximum pressure rating of your
pressure washer.
Check Detergent Siphoning Tube
Examine the filter on the detergent tube and clean if
clogged. The tube should fit tightly on the barbed fitting.
Examine the tube for leaks or tears. Replacethe filter or
tube if either isdamaged.
Cleaning Detergent Siphoning Tube
If you used the detergent siphoning tube, you must flush it
with clean water before stopping the engine.
• Placethe chemical injectionsiphon/filter in a bucket futl
of clean water.
• Attach the black low pressure nozzle.
• Flushfor I-2 minutes.
• Shut off the engine.
IMPORTANT: Simply shutting OFF engine will not
release pressure in the system. When the engine has
shut down, squeeze the trigger on the spray gun to
relieve the pressure in the hose.
/
12