Manual

b
Y_&_ $_ra_on'
_ powE_P_ODUCTS
° SHidethe nozzHe forward to adjust the spray to How
pressure mode (Figure H6).SHidethe nozzHe backward to
achieve high pressure.
SHidenozzHe backward
for high pressure mode.
SHidenozzHeforward for
How pressure mode and
detergent application.
° Point the nozzHe down towards a firm surface and press
the trigger to test the pattern (Figure H7).
° Twisting the nozzHe adjusts the spray pattern from a
narrow pattern to a fan pattern (Figure H8).
Twist nozzHe
countercHockwise for fan
spray pattern,
Twist nozzHe cHockwise
for narrow spray
pattern.
° For most effective cHeaning, keep the spray nozzHe
between 8 to 24 inches away from cHeaning surface.
. If you get the spray nozzHe too chose, especiaHHy using high
pressure mode,you may damage the surface being
cHeaned.
. Do Noe get cHoser than 8 inches when cHeaning tires.
Applying Detergent with the
Adjustable Nozzle
CAUTION! You must aeeach all hoses before you start
the engine. Starting the engine without all the hoses
connected and without the water turned ON wiHHdamage
the pump.
IMPORTANT: Use soaps designed speci_cammy for
pressure washers. HousehoHd detergents couHd damage
the pump.
To apply deeergene, follow ehese steps:
* Review the use of adjustabHe nozzHes.
* Prepare detergent soHution as required by the
manufacturer.
° Hang the detergent soHution on the "J" hook attached to
the accessory tray, as shown in Figure H9.
° PHace the smaHHfiHter end of the detergent siphoning tube
into the detergent container.
CAUTION! Keep the detergent siphoning tube from
coming in contact with the hot muffler.
. SHidethe adjustable nozzle forward to How pressure
mode. Detergent cannot be appHiedwith the nozzle in
high pressure position.
IO