Manual

UNPACKING
1. Removethe parts bag, accessories,andinserts includedwith
powerwasher.
2. Opencarton completely by cutting each corner from top to
bottom.
3. Ensureyou have all includeditems priorto assembly.
• MainUnit
• HandleAssembly
• HighPressureHose
• SiphonHose& Filter
• SprayGun
• LancewithQuickConnectFitting
• OilBottle
• HoseHookWireform
• PartsBag(whichincludesthefollowing):
- ChemicalTankCapwith hole if model is equippedwith a
ChemicalTank
- Operator'sManual
- Owner'sRegistrationCard
- BagcontainingColor-codedNozzles
4. If you are missing any items from your carton, please call
GeneracCustomerServiceat 1-888-436-3722. When calling
for assistance,pleasehavethe model and serial numberfrom
the datatag available.
5. Fill out and send in registration card. Write Modet number,
Serialnumber & date of purchase in the table locatedin the
"Whereto FindUs" section.
ASSEMBLY
Readentireoperator'smanualbeforeyou attemptto assembleor If
you haveany problemswith the assemblyof your powerwasher,
pleasecall GeneracCustomer Serviceat 1-888-436-3722. When
calling for assistance, please havethe model and serial number
from the data tag available.
1. Place handle (A) onto handle supports (B). Push in latch
buttonsand allow handleto slide into position (C). Buttonwill
lock handleinto place (Figure2).
Figure 2- Attach Handle
NOTE:
it may be necessaryto move the handle supportsfrom sideto
sidein order to alignthe handle so it will slide over the handle
supports.
2. Install hose hook (Figure3).
Figure3 - Install HoseHook
f
\
/
/
3. Insert color-colored nozzles in spaces provided in handle
(Figure4).
4. Placespraygun andnozzleextensioninto spraygun holderas
shown (Figure4).
5. Coil high pressurehose andhang on hook.
Figure4 - InsertNozzles