Manual

KNOWYOURPOWERWASHER
Readthis owner's manual and safety rules before operatingyour
high power washer.
Ifyou loanthis deviceto someone,ALWAYSloantheseinstructions
ANDthe owner's manualto the individual as well. Comparethe
illustrations with your high power washer to familiarize yourself
with the locations of variouscontrols (Figure1). Savethis manual
for future reference.Replacementowner's manualscan beprinted
from the GeneracWeb site.
A- Spray Gun- Controls the application of water onto the cleaning
surface with trigger device. Includesa trigger lock.
B - LancewithQuickConnect- Allows you to switch betweendifferent
nozzles.
C- High Pressure Hose- Connectone endto water pump andthe other
to the spraygun.
D - Recoil Starter - Usefor starting the engine.
E - Oil Fill - Check and add engineoil.
F - Air Filter - Protects engine by filtering dust and debris out of the
intake air.
G - Pump - Developshigh pressure.
H - Thermal Relief Valve- Cycleswater through the pump when water
reaches 125°F warm water will discharge from pump onto ground.
This preventsinternal pump damage.
I - Engine On/Off Switch - Turnthis switch to "ON" before using the
recoil starter. Turn the switch to "OFF"to stop the engine.
J - UnloaderValve- Controlsthe highpressure output.
K - HighPressure Outlet - Connectionfor high pressure hose.
L - Water Inlet - Connectionfor GardenHose.
M - Fuel Tank - Filltank with regularunleadedfuel. Always leaveroom
for fuel expansion.
N - Fuel On/Off Switch - Turnsfuel supply to the engineon and off.
O - Choke- Preparesa cold enginefor starting.
P- Throttle Lever - Increases or decreases engine speed. Throttle
should be at maximumtravel whenthe powerwasher is in use.
Q- Nozzles - Chemical injection, 0°, 15°, 25°, 40° for various high
pressurecleaning applications.
R- Chemical Tank - Used to hold power washer safe detergents to
be siphoned into the low pressurestream. (some units may not be
equippedwith tanks or may only have onetank).
S- Warning/OperationInstruction - Identifies proper procedure to
start!stop power washer.
T - Brain Plug - Used to drain engine oil.
U - Serial Number Location
ITEMSNOTSHOWN
• IdentificationLabel (on engineblower housing)- Providesmodel and
serial numberof power washer. Pleasehavethese readilyavailableif
calling for assistance.
• DetergentSiphoning Tube/Filter- Use to siphon power washer safe
detergentsinto the low pressurestream.
Figure1- Features& Controls
/
T
A
C
R
U
D
P