Manual

CHECKOILLEVEL
Oil level should be checked prior to each use or at least every 8
hours of operation.Keepoil level maintained.
1. Makesure powerwasher is on a levelsurface.
2. Cleanareaaroundoil fill and wipe dipstick clean removeoil fill
cap (Figure32).
3. Verifyoil is at the properlevel onthe dipstick.
4. Insert the dipstick into filler neck but do not screw it in.
5. Replaceandtighten oil fill cap.
Figure32- FillEngineOil
ADDINGENGINEOIL
1. Makesure powerwasher is on aflat, levelsurface.
2. Checkoil level as describedin CheckingOil Level.
3. If needed,slowly pour oil into oil fill opening until the proper
level onthe dipstick is reached.
4. Insert the dipstick into filler neck but do not screw it in.
5. If levelis low,fill untilthe oil level is between"L" and "H"onthe
dipstick (Figure33).
6. Replaceandtighten oil fill cap.
Figure33 - Dipstick
CHANGINGENGINEOIL
If you are usingyour power washer underextremelydirty or dusty
conditions,or in extremelyhot weather,changethe oil more often.
,ACAUTION!
,_ Avoidprolongedor repeatedskin contactwith used
motoroil.
• Usedmotoroil hasbeenshownto causeskincancerin certain
laboratoryanimals.
• Thoroughlywashexposedareaswithsoapandwater.
,_ KEEPOUTOF REACHOF CHILDREN.
• Don't pollute. Conserveresources.Return used oil to
collectioncenters.
Changeoil while engineis still warm from running, as follows:
1. Makesure unit is on a levelsurface.
2. Disconnectthe sparkplug wire from the spark plugand place
the wire where it cannot contactspark plug.
3. Cleanareaaround oil drain plug (A) (Figure34). The oil drain
plug is locatedat base of engine,oppositecarburetor.
4. Removeoil fill cap (Figure32).
5. Removeoil drain plug anddrain oil completely into a suitable
container.
6. Reinstalloil drain plug andtighten securely.
7. Slowly pour oil (about 20 oz.) into oilfill openingto the proper
level onthe dipstick. DONOToverfill.
8. Reinstalloil fill cap. Fingertighten cap securely.
9. Wipe up any spilled oil.
10. Properly dispose of oil in an accordance with all local
regulations.
Figure 34 - Oil Drain Plug
Acceptable Oil
i_' Level Range
1"7