Manual

The highpressurestreamof waterthat this equipment
producescancutthroughskinand its underlying
tissues,leadingto seriousinjuryand possible
amputation.Spray guntrapshighwater pressure,even
whenengineisstoppedand water is disconnected,
whichcan causeinjury.
* Keephighpressurehoseconnectedto pumpandspraygunwhile
systemis pressurized.
* ALWAYSpointsprayguninsafedirection,andsqueezespraygun
triggerto releasehighpressureeverytimeyoustopengine.Engage
triggerlockwhennotinuse.
3. Removenozzlefrom endof nozzleextension.
4. Usea small paperclip to free any foreign materialclogging or
restricting nozzle(Figure30).
Figure30 - Free ForeignMaterial
ENGINEMAINTENANCE
'_/f Unintentional sparkingcan resultin fire or
electric shock.
WHENADJUSTINGOR MAKINGREPAIRSTOYOURPOWER
WASHER
* Disconnectthesparkplugwirefromthe sparkplugandplacethe
wirewhereit cannotcontactsparkplug.
WHENTESTINGFORENGINESPARK
* Useapprovedsparkplugtester.
* DONOTcheckfor sparkwithsparkplugremoved.
ENGINEOILRECOMMENDATIONS
We recommendthe use of high=qualitydetergentoils acceptableif
classifiedfor service SF,SG,SH,SJ or higher.DO NOTusespecial
additives.
Outdoor temperatures determinethe proper oil viscosity for the
engine. Usethe chart to select the best viscosity for the outdoor
temperaturerangeexpected.
mEm
5. Removelancefrom spray gun.
6. Using a garden hose, remove additional debris by back
flushing waterthrough lance (Figure31). Backflush between
30 to 60 seconds.
7. Reinstallnozzleinto lance.
8. Reconnectlance to spray gun.
Figure31 - Back FlushLance
9. Make sure garden hose is connected to pump water inlet.
Checkthat high pressurehose is connectedto spray gun and
pump. Turnon water.
10. Start enginefollowing instructions How to Start Your Power
Washer.
11. Test power washer by operating with each quick connect
nozzle.
lm| zmm
°F =20 =10 0 10 20 32 40 60
oc/o -2'o -1'o 6 lo 2'o
Temperature Range of Expected Use
* Below 50°F (10°C) the use of SAE 30 will result in hard starting.
** Above 80°F (27°C) the use of 10W30 may cause increased oil consumption.
Check oil levelmore frequently.
NOTE:
Synthetic oil meeting &SAC GF-2,API certificationmark
and API servicesymbolwith "SJ/CF ENERGYCONSERVING"
or higher, is an acceptable oil at all temperatures.Use of
syntheticoil doesnotalter requiredoil changeintervals.
NOTE:
Theengine is equipped withan "Oil Alert System". This
systemwill automatically stopthe engine before the oil level
fails below a safe limit.Toavoidtheinconvenienceof an
unexpected shutdown,always checkthe engine oil levelbefore
startup.
16