Manual

The highpressurestreamof waterthat this equipment
producescancutthroughskinand itsunderlying
tissues,leadingto seriousinjuryand possible
amputation.Spray guntrapshighwater pressure,even
whenengineis stoppedand water is disconnected,
whichcancauseinjury.
• DONOTallow CHILDRENto operatepowerwasher or playnearby.
• Keephigh pressure hose connectedto pumpand spray gun while
system is pressurized.
• NEVERaim spray gun at people, animals or electrical devices.
Seriousinjury will result.
• DONOTsecure spray gun in openposition.
• DONOTleavespray gun unattendedwhile machine is running.
• NEVERuse a spray gun which does not have a trigger lock or
trigger guard in placeand in working order.
• Always be certain spray gun, nozzles and accessories are
correctly attached.
Contactwith muffler area can resultin seriousburns.Exhaustheat/gasescanignite
combustibles,structuresor damage fuel tank
causinga fire.
• DONOTtouchhotpartsandAVOIDhotexhaustgases.
• Allowequipmentto coolbeforetouching.
• Keepat least5 feet(152cm)of clearanceon allsidesof power
washerincludingoverhead.
• It isaviolationof CaliforniaPublicResourceCode,Section4442,
to useoroperatetheengineonanyforest-covered,brush-covered,
orgrass-coveredlandunlesstheexhaustsystemis equippedwith
asparkarrester,asdefinedinSection4442,maintainedineffective
workingorder.Otherstatesor federaljurisdictionsmay have
similarlaws.
• Replacementpartsmustbethe sameandinstalledin the same
positionasthe originalparts.
AUTOMATICCOOLDOWNSYSTEM(THERMAL
RELIEF)
If you run the engine on your power washer for 3-5 minutes
without pressing the trigger on the spray gun, circulating water
in the pump can reach temperatures above 125°E The system
engages to cool the pump by discharging the warm water onto
the ground.
HOWTOSTOPYOURPOWERWASHER
1. Release spray gun trigger.
2. Move throttle control lever on engine to "LOW" (turtle)
position (Figure 29).
3. Turn the engine ON/OFF switch to the "OFF" position.
4. ALWAYS point spray gun in a safe direction, and squeeze
spray gun trigger to release retained high water pressure.
Engage trigger lock when not in use.
5. Turn OFFwater supply.
Figure 2g- Throttle Position
High Low
IMPORTANT:Spray gun traps high water pressure, even when
engineis stopped andwater is disconnected.
Thehighpressurestream of water that this equipment
producescancutthrough skinanditsunderlying
tissues, leadingto seriousinjuryand possible
amputation.Spray gun traps highwater pressure,even
when engineis stoppedand water is disconnected,
which cancauseinjury.
• Keephigh pressurehose connected to pump and spray gun while
system is pressurized.
• ALWAYSpoint spray gun in safe direction, squeeze spray gun
trigger to release high pressure, every time you stop engine.
Engagetrigger lock when not in use.
MAINTENANCERECOMMENDATIONS
Regular maintenance wilt improve the performance and extend
the life of the power washer. See any qualified dealer for service.
The power washer's warranty does not cover items that have been
subjected to operator abuse or negligence. To receive full value
from the warranty, the operator must maintain the power washer
as instructed in this manual, including proper storage as detailed
in Winter Storage and Long Term Storage.
NOTE:
Shouldyouhavequestions aboutreplacingcomponents
on yourpowerwasher,pleasecall 1-888-435-3722 for
assistance.
Some adjustments will need to be made periodicallyto properly
maintainyour power washer.
All service and adjustments should be made at least once each
season. Follow the requirements in the Maintenance Schedule
chart.
NOTE:
Oncea yearyoushouldcleanor replacethe sparkplug,clean
or replace the air filter, and checkthe spraygun and nozzle
extensionassembly for wear. A new sparkplugand cleanair
filter assure properfuel-air mixture and helpyourenginerun
better and lastlonger.
I[4