Manual

The highpressurestreamof waterthat this equipment
producescancutthroughskinand itsunderlying
tissues,leadingto seriousinjury and possible
amputation.
• NEVERconnecthighpressurehoseto lance.
• Keephighpressurehoseconnectedto pumpandspraygunwhile
systemis pressurized.
• Alwaysbe certain spray gun, nozzlesand accessoriesare
correctlyattached.
6. Connect high pressure hose to pump (uncoil hose before
connecting to pump or spray gun) (Figure 12). Tighten by
hand.
,ACAUTiON!
,_The hosecanbe damagedif it comesin contactwith a
hot engineor muffler.
Figure12 - ConnectHighPressureHoseto Pump
.
Turn ON the water, squeezethe trigger to purge the pump
system of air (Figure13).
Figure 13-Squeeze Trigger
HOW TOUSENOZZLES
The quick-connect on the nozzle lance allows you to switch
between different nozzles. Nozzlescan be changed while power
washer is running once spray gun trigger is locked in the safety
position. The nozzles vary the pressure and spray pattern as
shown.
• Formost effectivecleaning,keep nozzlefrom 8 to 24 inches(20
to 61 cm) awayfrom cleaningsurface.
• If you get nozzletoo close, especially using a high pressure
nozzle,you may damagesurface beingcleaned.
The highpressurestreamof waterthat this equipment
producescancutthrough skinand its underlying
tissues,leadingto serious injuryand possible
amputation.
• NEVERexchangenozzleswithoutthetriggerlockbeingengagedon
the spraygun.
• DONOTtwistnozzleswhilespraying.
Followtheseinstructions to changenozzles:
1. Pull back collar on quick-connect and pull current nozzles
off. Storenozzlesin holderprovidedonthe accessory storage
(Figure14).
Figure 14 - Nozzles
.
3.
Selectdesirednozzle.
Pull back on collar, insert new nozzleand releasecollar.Tug
on nozzleto makesure it is securelyin place.
• Fordelicaterinse (lowerpressureand higherflow), for gentle
cleaning of cars/trucks, boats, RV's, patio furniture, lawn
equipment,etc.,selectwhitenozzle(Figure15).
Figure 15 - Wash Pressure Nozzle (White)
/