Spec Sheet

5 of 11
®
available accessories100 / 130 / 150 kW
Model # Product Description
G007169-0
Mobile Link
®
4G LTE
Cellular Accessory
Generac’s Mobile Link allows you to check the status of your generator from anywhere that
you have access to an Internet connection from a PC or with any smart device. You will even
be notified when a change in the generator’s status occurs via e-mail or text message.
Note: Harness Adapter Kit required. Available in the U.S. only.
G009883-0 Cold Weather Kit
If the temperature regularly falls below 32 °F (0 °C), install a cold weather kit to maintain
optimal battery temperature. Kit consists of battery warmer with thermostat built into the
wrap.
G009884-0 Extreme Cold Weather Kit
Recommended where the temperature regularly falls below 32 °F (0 °C) for extended peri-
ods of time. For liquid cooled units only.
G005651-0 Base Plug Kit Add base plugs to the base of the generator to keep out debris.
G005703-0 - Bisque Paint Kit
If the generator enclosure is scratched or damaged, it is important to touch-up the paint to
protect from future corrosion. The paint kit includes the necessary paint to properly maintain
or touch-up a generator enclosure.
G009882-0
Scheduled Maintenance
Kit
The Liquid-Cooled Scheduled Maintenance Kits offer all the hardware necessary to perform
complete maintenance on Generac liquid-cooled generators.
G006510-0 E-Stop
E-stop allows for immediate fuel shutoff and generator shutdown in the event of an emer-
gency.
G007005-0
Wi-Fi LP Fuel Level
Monitor
The Wi-Fi enabled LP fuel level monitor provides constant monitoring of the connected LP
fuel tank. Monitoring the LP tank’s fuel level is an important step in making sure your
generator is ready to run during an unexpected power failure. Status alerts are available
through a free application to notify when your LP tank is in need of a refill.
G007000-0 (50 amp)
G007006-0 (100 amp)
Smart Management
Module
Smart Management Modules (SMM) are used to optimize the performance of a standby
generator. They manage large electrical loads upon startup and shed them to aid in
recovery when overloaded. In many cases, using SMM’s can reduce the overall size and
cost of the system.
G009885-0
400 A CB Kit
400 A Circuit Breaker Kit designed for three phase products built with a factory installed
circuit breaker greater than 400 A.
A0000018981
Ultrasonic Cleaner
Solution
An ultra-concentrated anti-corrosive cleaning solution engineered to reach the smallest
cavities to clean the toughest contaminants. This water based formula is non-toxic,
biodegradable, safe for both metal and plastic surfaces, and is superior in rinsability.
A0000019001
All Surface Protectant
All surface protectant for vinyl, rubber, plastics creates a barrier that seals & protects sur-
faces from water, UV rays while renewing the look of the surface.
Protector
®
Series