Spec Sheet

4 of 11
®
operating data100 / 130 / 150 kW
ENGINE COOLING
100 kW 130 kW 150 kW
Air Flow (Fan Air Flow Across Radiator) - Open Set scfm (m
3
/ min) 6,589 (186) 5,415 (153.3) 5,598 (158.5)
System Coolant Capacity (gal / liters) 5.5 (20.8) 6.3 (24.0) 6.3 (24.0)
Heat Rejection to Coolant (BTU per hr / MJ per hr) Contact Factory Contact Factory Contact Factory
Maximum Operation Air Temperature on Radiator (°F / °C) Contact Factory Contact Factory Contact Factory
Maximum Ambient Temperature (°F / °C) 122 (50) 122 (50) 122 (50)
COMBUSTION REQUIREMENTS
Flow at Rated Power scfm (m
3
/min) 230 (6.5) 371 (10.5) 343 (9.7)
SOUND EMISSIONS
Sound Output in dB(A) at 23 ft (7 m) With Generator* 71 db 75 db 80 db
*In normal operation
EXHAUST
Exhaust Flow at Rated Output scfm (m
3
/min) 771 (21.8) 1,198 (34.0) 1,206 (34.1)
Exhaust Temperature (Rated Output) °F (°C) 1,350 (732) 1,285 (696) 1,440 (782)
ENGINE PARAMETERS
Rated Engine Speed (RPM) 1,800 1,800 1,800
POWER ADJUSTMENT FOR AMBIENT CONDITIONS
Temperature Deration RG10090 / RG13090 on NG & LP 77°F before derate 3.3% per 10°F above 77°F
Temperature Deration RG15090 on NG 77°F before derate 8% per 5°F above 77°F
Temperature Deration RG15090 on LP 77°F before derate 11% per 5°F above 77°F
Altitude Deration (100 kW / 130kW) 3% for every 1,000 ft above 600 ft
Altitude Deration (150 kW) 2.1% for every 1,000 ft above 600 ft
CONTROLLER FEATURES
Two-Line Plain Text LCD Display............................................................................................................................................ Simple user interface for ease of operation.
Mode Switch: AUTO.................................................................................................................................................. Automatic Start on Utility failure. 7 day exerciser.
OFF............................................................................................................................... Stops unit. Power is removed. Control and charger still operate.
MANUAL..............................................................................................Start with starter control, unit stays on. If utility fails, transfer to load takes place.
Programmable Start Delay Between 10-30 Seconds .........................................................................................................................................................10 sec standard
Engine Start Sequence .............................................................................................................................. Cyclic cranking: 16 sec on, 7 rest (90 sec maximum duration)
Engine Warm-up..............................................................................................................................................................................................................................5 sec
Engine Cool-Down ..........................................................................................................................................................................................................................1 min
Starter Lock-Out......................................................................................................................................... Starter cannot re-engage until 5 sec after engine has stopped.
Smart Battery Charger ................................................................................................................................................................................................................ Standard
Automatic Voltage Regulation With Over and Under Voltage Protection........................................................................................................................................ Standard
Automatic Low Oil Pressure Shutdown........................................................................................................................................................................................ Standard
Overspeed Shutdown....................................................................................................................................................................................................... Standard, 72 Hz
High Temperature Shutdown ..................................................................................................................................................................................................... Standard
Overcrank Protection .................................................................................................................................................................................................................. Standard
Safety Fused .............................................................................................................................................................................................................................. Standard
Failure to Transfer Protection...................................................................................................................................................................................................... Standard
Low Battery Protection................................................................................................................................................................................................................ Standard
50 Event Run Log....................................................................................................................................................................................................................... Standard
Future Set Capable Exerciser..................................................................................................................................................................................................... Standard
Incorrect Wiring Protection........................................................................................................................................................................................................ Standard
Internal Fault Protection.............................................................................................................................................................................................................. Standard
Common External Fault Capability .............................................................................................................................................................................................. Standard
Governor Failure Protection ....................................................................................................................................................................................................... Standard
Protector
®
Series