Spec Sheet

2 of 11
®
application & engineering data100 / 130 / 150 kW
ENGINE SPECIFICATIONS
100 kW 130 / 150 kW
Make Generac Generac
Type
V V
Cylinders 8 8
Displacement - In
3
(L) 540 (8.86) 540 (8.86)
Bore (in / mm) 4.5 / 114.3 4.5 / 114.3
Stroke (in / mm) 4.25 / 107.95 4.25 / 107.95
Compression Ratio 9.9:1 9.1:1
Intake Air System Naturally Aspirated Turbocharged and Aftercooled
Lifter Type Hydraulic Roller Hydraulic Roller
ENGINE LUBRICATION SYSTEM
Oil Pump Type Gear
Oil Filter Type Full Flow Spin-On Cartridge
Crankcase Capacity (qt / L) 10.5 / 9.9
ENGINE COOLING SYSTEM
Type Pressurized Closed
Water Pump Belt-Driven
Fan Speed (rpm) 2,330
Fan Diameter (in / cm) 22 (55.9)
Fan Mode Pusher
FUEL SYSTEM
Fuel Type Natural Gas, Propane Vapor
Carburetor Down Draft
Secondary Fuel Regulator Standard
Fuel Shut Off Solenoid Standard
LP Fuel Pressure
11 - 14 in Water Column (100kW)
7 - 11 in Water Column (130 kW and 150 kW)
NG Fuel Pressure
11 - 14 in Water Column (100 kW)
7 - 11 in Water Column (130 kW and 150 kW)
ENCLOSURE FEATURES
Aluminum weather protective
enclosure
Ensures protection against mother nature.
Electrostatically applied textured epoxy paint for added
durability.
Enclosed critical grade muffler
Quiet, critical grade muffler is mounted inside the unit to pre-
vent injuries.
Small, compact, attractive Makes for an easy, eye appealing installation.
SAE Sound attenuated enclosure ensures quiet operation.
GENERATOR FEATURES
Revolving field heavy duty generator
Directly connected to the engine
Operating temperature rise 135° C above 25° C ambient
Class H insulation is NEMA rated
All models fully prototyped tested
ELECTRICAL SYSTEM
Battery Charger Alternator 40 Amp
Static Battery Charger 2.5 Amp
Recommended Battery (battery included) Group 31, 925 CCA
System Voltage 12 Volts
GOVERNOR SPECIFICATIONS
Type Electronic
Frequency Regulation Isochronous
Steady State Regulation Designed for Sensitive Electronics
VOLTAGE REGULATION
Type Full Digital
Sensing All
Regulation Designed for Sensitive Electronics
GENERATOR SPECIFICATIONS
100 kW 130 / 150 kW
Type Synchronous Synchronous
Rotor Insulation Class H H
Stator Insulation Class H H
Telephone Interference Factor (TIF) <50 <50
Alternator Output Leads 1-Phase 4 wire 4 wire
Alternator Output Leads 3-Phase 12 wire 12 wire
Bearings Sealed Ball Sealed Ball
Coupling Flexible Disc Flexible Disc
Excitation System Synchronous Brushless Synchronous Brushless
Total Harmonic Distortion <5% <5%
(All ratings in accordance with BS5514, ISO3046, ISO8528, SAE J1349 and DIN6271)
Protector
®
Series