Product Manual
Table Of Contents
- Section 1: Safety Rules & General Information
- Section 2: General Information
- Section 3: Activation and Startup
- Section 4: Operation
- Section 5: Maintenance
- Component Locations
- Access Panels
- Maintenance
- Remove From Service
- 25 Hour Break-In
- Daily Maintenance
- Schedule A Maintenance
- Schedule A Maintenance Item Locations
- Preliminary Instructions
- Inspecting the Enclosure Louvers
- Inspecting the Fuel Lines
- Inspecting Coolant Level and Hoses
- Inspecting Radiator for Clogging
- Checking Lubricating Oil Level and Drain Hose
- Replacing Lubricating Oil and Oil Filter
- Checking Battery Condition/Fluid Level
- Inspecting Accessory/Drive Belt
- Replacing Air Filter Element
- Final Instructions
- Schedule B Maintenance
- Schedule C Maintenance
- Return To Service
- Section 6: Troubleshooting
Owner’s Manual for Spark-Ignited Stationary Generators 23
Maintenance
Section 5: Maintenance
Component Locations
NOTE: The 4.5L (48 kW) unit is depicted in the artwork
used in this manual. The location and appearance of
some components may vary between engine models.
The viewing window side of the enclosure is identified as
the rear of the generator set. The right and left sides are
identified by standing at the rear and looking towards the
front of the unit.
Figure 5-1. Rear View
Figure 5-2. Left Side View
010061
A 7.5 Amp fuse and USB port
B Control panel and LCD
C Main line circuit breaker (MLCB)
D Viewing window
E Left side
F Right side
A
F
E
D
C
B
010065
A Air filter element
B Accessory/fan belt
C Oil filter
D Oil level dipstick/fill cap
E Battery
D
C
B
A
E