Product Manual
Table Of Contents
- Section 1: Safety Rules & General Information
- Section 2: General Information
- Section 3: Activation and Startup
- Section 4: Operation
- Section 5: Maintenance
- Component Locations
- Access Panels
- Maintenance
- Remove From Service
- 25 Hour Break-In
- Daily Maintenance
- Schedule A Maintenance
- Schedule A Maintenance Item Locations
- Preliminary Instructions
- Inspecting the Enclosure Louvers
- Inspecting the Fuel Lines
- Inspecting Coolant Level and Hoses
- Inspecting Radiator for Clogging
- Checking Lubricating Oil Level and Drain Hose
- Replacing Lubricating Oil and Oil Filter
- Checking Battery Condition/Fluid Level
- Inspecting Accessory/Drive Belt
- Replacing Air Filter Element
- Final Instructions
- Schedule B Maintenance
- Schedule C Maintenance
- Return To Service
- Section 6: Troubleshooting
Activation and Startup
Owner’s Manual for Spark-Ignited Stationary Generators 11
Activating the Unit
Display Reads:
Generator Active is displayed on the
LCD during initial startup. After displaying
firmware and hardware version codes, as
well as other system information, the
Install Wizard is launched, and the
Language screen is displayed.
Use Up arrow or Down arrow to scroll to
desired language.
Press ENTER.
If the wrong language is selected, it may be changed
later using the Edit menu.
Display Reads:
Press ENTER. Press ESCAPE to abort the activation sequence. NOT
ACTIVATED is displayed and unit will run in MANUAL
only. Disconnect and reconnect the negative battery
cable to restart the activation routine. If power is
removed after a successful activation, no data is lost,
but time and date must be updated.
Display Reads:
Go to www.activategen.com or call 1-
888-9ACTIVATE (922-8482, US & Can-
ada only) if activation passcode is not
available.
If activation pass code is available, wait a
few seconds for the next display.
Display Reads:
Use Up arrow or Down arrow to
increment or decrement the digit to
correspond to the first number of the
pass code.
Press ENTER.
Repeat step to enter remaining digits.
Press ESCAPE to return to preceding digits if a
correction becomes necessary.
If attempts to enter activation code are unsuccessful,
verify number against the activation code given on
activategen.com. If it is correct, contact 1-888-
9ACTIVATE (922-8482, US & Canada only).
For
international assistance, call 01-262-953-5155.
Display Reads:
Use Up arrow or Down arrow to
increment or decrement the hour. Press
ENTER.
Use Up arrow or Down arrow to
increment or decrement the minute.
Press ENTER.
Use Up arrow or Down arrow to select
the month. Press ENTER.
Use Up arrow or Down arrow to
increment or decrement the date. Press
ENTER.
Use Up arrow or Down arrow to
increment or decrement the year. Press
ENTER.
Language
- English +
Up Arrow = (+)
Down Arrow = (-)
Activate me (ENT) or
ESC to run in manual
To Activate go to
www.activategen.com
SN 1234567890
PASS CODE XXXXX
Select Hour (0-23)
- 6 +