Product Manual
Table Of Contents
- Section 1: Safety Rules & General Information
- Section 2: General Information
- Section 3: Activation and Startup
- Section 4: Operation
- Section 5: Maintenance
- Component Locations
- Access Panels
- Maintenance
- Remove From Service
- 25 Hour Break-In
- Daily Maintenance
- Schedule A Maintenance
- Schedule A Maintenance Item Locations
- Preliminary Instructions
- Inspecting the Enclosure Louvers
- Inspecting the Fuel Lines
- Inspecting Coolant Level and Hoses
- Inspecting Radiator for Clogging
- Checking Lubricating Oil Level and Drain Hose
- Replacing Lubricating Oil and Oil Filter
- Checking Battery Condition/Fluid Level
- Inspecting Accessory/Drive Belt
- Replacing Air Filter Element
- Final Instructions
- Schedule B Maintenance
- Schedule C Maintenance
- Return To Service
- Section 6: Troubleshooting
Activation and Startup
10 Owner’s Manual for Spark-Ignited Stationary Generators
Opening the Viewing Window
Proceed as follows to open the viewing window:
1. Remove plastic film from both sides of viewing win-
dow.
2. Lift viewing window up to access control panel.
3. See Figure 3-4. To hold viewing window open,
remove rod from clip at back of window and insert
into hole in frame (A).
Figure 3-4. Viewing Window
006373
A