Product Manual

Owner’s Manual for Stationary Generators 21
Operation
Section 4: Operation
Control Panel
NOTE: The control panel is intended for use by qualified
service personnel only.
The control panel is located behind the viewing window
at
the rear of the unit. See Figure 3-5 and Figure 4-1.
Automatic start-up. Disconnect utility power and
render unit inoperable before working on unit.
Failure to do so will result in death or serious injury.
(000191)
DANGER
NOTE: For added security, place a DO NOT OPERATE
tag or placard on both the control panel and transfer
switch.
Auto/Manual/Off
Feature Description
AUTO
Press to activate fully automatic operation. Green LED illuminates to confirm that system is in AUTO mode.
Transfer to standby power occurs if utility power fails. 
Functionality of exercise timer is
enabled, if set.
MANUAL
Press to crank and start engine. Blu
e LED illuminates to confirm that system is in MANUAL mode.
Transfer to standby power occurs if u
tility power fails.
Functionality of exercise timer is disabled.
OFF
Press to shut down engine, if runn
ing. Red LED illuminates to confirm that system is in OFF mode.
Transfer to standby power does not occur if utility power fails.
B
A
C
D
E
F
G
H
009680
Figure 4-1. Control Panel and LCD Screen
A. Up Arrow
B. Enter
C. Down Arrow
D. Escape
E. Off
F. Manual
G. Auto
H. LCD Screen

