Product Manual

Maintenance
36 Owner’s Manual for Stationary Generators
13. Press MANUAL on the control panel to start the
engine.
14. Allo
w the engine to run for one minute. Check for
leaks while the engine is running.
15. Pr
ess OFF on the control panel. A red LED
illuminates to confirm that the system is in the OFF
mode.
16. W
ait ten minutes for the engine to cool and to allow
oil to drain back to the oil pan.
17. Chec
k oil level and add oil as necessary. See
Check Lubricating Oil Level and Drain Hose.
18. Install fill cap.
NOTE: On
36 kW, 45 kW, and 60 kW models, open
shutoff valve to enable Lube Oil Maintainer System.
NOTE: Dispo
se of used oil and oil filter at a proper
collection center.
B
A
Figure 5-8. Oil Drain Hose, Fill Cap, Dipstick and Filter